2D Stirrup Machine development and use of innovative methods

The machine is called a 2D Stirrup Machine, also known as rebar bending hoop machine, and we called bending hoop machine, in fact, it is the place of the hand wrench, chassis and steel case of the machine, used poorly, not as manual faster it, so the staff must learn to bend steel hoop machine. Single pedal bending hoop machine is in use, there is considerable risk of workers' fingers will fix flat folder, it is indeed scary and fear, it is not a laughing matter, the operation to be careful hundredfold . However, the deduction applies to Viagra and two semicircular rib reinforcement hooks single pedal, it has its advantages, but also can not underestimate, in Granville special angle, can be considered a very good cause.
Double springboard is different than single pedal a big step forward, but more than a single pedal is still a great potential to be tapped, can further innovation. Then there are the twin posts of 2D Stirrup Machine, whose main characteristic is continuous, working drawback is that while the two curved angle (90 degrees and 135 degrees), we should get another piece operating table, the effect is not very satisfactory. We use hand-bent stirrups, the workpiece can be moved to the left, we called "Zola molding" can also move the workpiece to the right, we called the "right to pull molding", the use of reinforced bending hoop machine, it was also Similarly, you can also move to the left to the right, left, right, each has its advantages and disadvantages, the workpiece to the left security, human effort, the work to the right person's arm to go along with the machine, but people who suffer tired fast and rapid, regardless of the left to the right, the left and right sides are required bending hoop machine are nailed planks to make it longer, in order to discharge length dash.
The use of 2D Stirrup Machine preferably while there are two, one for bending a small diameter, a curved ribs for a deduction for the bend stirrups, a bend of the hook to the head of a large diameter bend Bend the other end of the hook, when two hook bend, you can put two bending hoop machine placed beneath two channels, so that the machine is just embedded in the channel where the casters, so you can very easily adjust the two steel hoop bending machine distance, and because they maintain stable machine, do not turn the workpiece, which finished first flew Granville Granville other end can be very convenient and neat.