Installation Precautions 2D Stirrup Machine

  2D Stirrup Machine used to bend steel of various diameters and round, fast and efficient: set several holes on the working disk, it can bend rebar various models of diameter.

 1, note, is strictly prohibited within the operating radius of curved steel and body to stand; In addition, semi-finished products to be stacked neatly curved good, can not hook up.

 2, steel bending arc machine wheel change direction, then it must be very stable.

 3, after the job is completed, to promptly clean up the site, maintenance of good mechanical, power lock box.

 4, regular inspection of the mandrel, the stopper, turntable, to ensure that there will be no damage and crack phenomenon, in addition to securing a reliable shield to empty the machine after the operation confirmed before normal operation.

 5, 2D Stirrup Machine, non-mechanical processing exceeds the specified rebar diameter, root number and mechanical speed.


 6, reinforced bending arc machine periodically check the mechanical performance is good, countertops table and bending machines to maintain the level; and various ready ahead of the mandrel tool block.

 7, in accordance with the diameter and 2D Stirrup Machine, steel processing requirements to install the mandrel, forming the shaft, gear shaft or variable iron fences, and 2.5 times the diameter of the mandrel bar diameter.

 8, when the job may need to bend the bars inserted in one end of the dial fixed gap, the other end is fixed and hand pressed against the body; check fuselage fixed, mounted on one side of the block to ensure that before the start of steel.